Comments for Cielab - Digital Colour Accuracy

Comment on How to change the Flexisign Pro rulers unit of measurement by Linda

Linda — Thu, 12 Apr 2012 10:39:59 +0000

Thank you soooooooooooooooooooooooooooo much for this. I have spent hours wondering why my “Preferences” tab doesn’t have Unit of Measure like the Help file advises.

Literally fixed it in a second

Comment on SAi Flexisign & Photoprint v10.0.4 now available by Michael Rooney

Michael Rooney — Fri, 10 Feb 2012 03:55:07 +0000

Please complete the form at this address as follows to update your v10 password to a v10.5 password (this will also then offer you a link to the downloader): http://www.sign.com/pdf/

Comment on SAi Flexisign & Photoprint v10.0.4 now available by zubair

zubair — Sun, 05 Feb 2012 14:37:46 +0000

i need a flexi sign pro password or user name plz send me

Comment on HP Designjet L25500 Error Codes by jimdobbin

jimdobbin — Wed, 21 Dec 2011 03:12:43 +0000

It sounds like a dirty ink funnel error – take it out and clean it under a tap

Comment on HP Designjet L25500 Error Codes by vigan

vigan — Wed, 21 Dec 2011 00:26:38 +0000

erorr code 98:03 any bady know abaut this error, please somebady halp…

Comment on HP Designjet L25500 Error Codes by Michael Rooney

Michael Rooney — Thu, 01 Sep 2011 00:13:18 +0000

We have requested the beep be added to the firmware and HP have acknowledged the requirement for an audible alert.

They are implementing it in some way in the future but the details at this stage are not public

Comment on HP Designjet L25500 Error Codes by creativeworx

creativeworx — Thu, 04 Aug 2011 21:17:45 +0000

Hi Cielab

When the ink runs out on the HP Latex there is no beep indication to let you know, is there a setting for this?
I’ve looked on the printer settings but can’t anything.

Cheers

Comment on Cielab ColourCLUB live with revolutionary support of HP L25500 Latex by Michael Rooney

Michael Rooney — Wed, 27 Jul 2011 02:37:58 +0000

Hi Shane,

Once you are a member on the site, just email us and we will enable the ColourCLUB section for you

Comment on Cielab ColourCLUB live with revolutionary support of HP L25500 Latex by Shane

Shane — Wed, 27 Jul 2011 00:19:48 +0000

Sounds great, how do I join the club ?

Comment on HP Designjet L25500 Possible Substrate Jam but none visable by Michael Rooney

Michael Rooney — Thu, 14 Jul 2011 23:23:34 +0000

I would like to update this post with some new info relating to these printers as they get older

Excessive lubrication of the rail can build up in a mixture of oil and ink creating a “grease” like sludge on the rail. If this is the case then you ay need to clean the old sludge off from the rail before applying fresh lubricant. To clean this rail we suggest an isowipe BUT please be very careful when ever doing anything near this rail that you do not touch the encoder strip in any way. These are extremely fragile and expensive to replace.

We have discovered that the lubricating felts on each side of the carriage do deteriorate with a lot of use of the printer and may require replacement. When they deteriorate they tend to bind on the rail adding tension on the drive motor and this can throw this substrate jam error. Within warranty period this is usually done by HP.

NOTE: Please note that as per our terms and conditions all info supplied is as a guide only and no guarantee or warranty is assumed